The commercialization of Micro LED depends on the huge amount of transfer technology

Nowadays, when many people renovate their houses, most of the kitchens are decorated with stones. However, the kitchen is also the hardest hit area for soot. If it goes on like this, it will turn yellow and greasy, which will not only affect the overall appearance, but also easily breed bacteria. So how to effectively deal with the important position in the kitchen? Chongqing Housekeeping Entrepreneurship Training Company tells you how to do it.

Clean with all-purpose detergent

For tile gaps, you can first use a brush to dip a little decontamination cream to remove dirt, and then brush a layer of waterproofing agent on the gap, which can not only prevent water seepage, but also prevent mold growth. It is worth mentioning that the cleaning and disinfectants widely used in households currently contain chemical substances such as acid and alkali. These chemical substances have a great impact on natural stone and have adverse reactions to the surface color and internal mineral composition of the stone.

In particular, most cleaners must react on the stone surface for at least five minutes to be effective. But during this period, the cleaning agent has been damaging the stone, so the bathroom stone surface should be cleaned with a pH-neutral cleaning agent.

Acidic cleaners can remove calcium, cement stains, limescale from the surface of cleaning materials, as well as the stubborn urine stains and oxidized metal stains often found in toilets. Alkaline cleaners can remove all kinds of animal and vegetable oil stains and mechanical oil stains, and remove the wax layer on the ground. Such as special enhanced oil cleaning agent; strong waxing water, etc. Improper use of acid-base cleaners will not only waste the cleaner, but also damage the surface of the cleaner to varying degrees, and may even cause damage to the user's skin or eyes.

When using acid-base cleaners, pay attention to the following points:

1. Clarify the usage and contraindications. Please read the instruction manual carefully before use, or consult the supplier for instructions.

2. A small sample test should be carried out in an inconspicuous place before use to confirm that the cleaning solvent will not cause damage to the cleaning object. The cleaning solvent should be diluted according to the specified dilution ratio. Wear work gloves and eye protection if necessary.

Avoid skin or eye contact with cleanser. The cleaner should not stay on the surface of the cleaner for too long. Wash with clean water after use.

4. It cannot be used on the surface of objects that are sensitive to acid and alkali. For example, some cleaners have a damaging effect on marble, glass, metal, and other surfaces.

architectural lighting supplier